SIRIUS-UM

Hwacheon SIRIUS-UM

• Tough machine structure The bilateral gate structure in SIRIUS-UX is the ideal design for distributing the vibration, the weight, and the heat throughout the entire frame. The machine is built through the finite element analysis to minimize the frame distortion which may be caused by machining condition or environment. The distance between the spindle and the body is designed short, so the machine stays stable after a prolonged operation. • High-performance spindle design The spindle integrates the motor to limit vibration, noise, and power loss at high speed rotation. The jet of oil is injected directly onto the spindle bearing for effective cooling, and the motor and the spindle assembly are jacket-cooled to limit the displacement caused by heat. To achieve greater precision, the spindle constantly monitors for possible thermal displacement and makes necessary adjustment in real time. • High-precision feed drive SIRIUS-UMprovides powerful feed performance using the Z-axis 6-bloc k LM guide. The servo motor is coupled directly to the drive; and while the tensile preload ball screws provide smooth operation, the roller linear guide allows for rapid feed. • Environment-friendly water-oil separation The fluid is separated naturally without a powered separation unit. This environment-friendly fluid separation system increases the life of the lubricant, while at the same time provides clean work environment.

Vertical High-speed Die and Mold Machining Center
Machine Type: Machining Center
Num. of Axes: 3
Operation Type: CNC
CNC Brand: Fanuc 31i-A
Table/Work Support
Table Size L x W (in.): 33.460(L) x 19.700(W)
Max Workpiece Weight (lbs): 1,760
Support Index Table: None
Support Rotary Table: Optional
Spindle(s)
Direction: Vertical
Taper: BT-40
Taper Opt: BBT-40
Top RPM: 20,000
Top RPM Opt: 12,000
HP (30 min rating): 25.00
U Axis: None
Tooling
Tool Carrier: ATC
Num. Tools: 24
Tool Change Time (sec): 2.80
Pallet Changer Available: Optional
Num. Pallets: 2
Axes And Travels
Num. Axes: 3
Num. Axes Opt: 4
U Axis: None
Travel Max Feed Rate Rapid Traverse
X1 29.520" 945ipm
Y1 19.700" 945ipm
Z1 17.710" 945ipm
Manufacturing machine
Manufacturing machine
Hurco
Iscar
Mastercam 2025 Now Available
DN Solutions
Chevalier's FMG-B1224/1640
Chevalier's FMG-B1224/1640