Okuma MILLAC 853PF-5X
Our MILLAC 853PF-5X is a state-of-the-art, 5-axisprofiler that answers the need for shorter setup times with process-intensive machining of materials from aluminum to titanium to produce high-quality complex components. This is an ideal machine for aerospace airframe and wing spar components. Based on a powerfully built machine structure, all five axes (X-Y-Z-A-B) use the rugged cast-iron box ways to deliver the best combination of high rigidity, heavy load-carrying capacity, and low friction. In addition, the A/B axis can swivel/swing ± 35°. The standard full-enclosure shielding protects the operator from splashing coolant and flying chips, while the pedestal-mounted operator’s panel can be rolled to any position for operator convenience.
| Machine Type: | Machining Center |
|---|---|
| Num. of Axes: | 5 |
| Operation Type: | CNC |
| CNC Brand: | Fanuc 15-MB |
| Table Size L x W (in.): | 126.000(L) x 33.470(W) |
|---|---|
| Max Workpiece Weight (lbs): | 6,600 |
| Direction: | Vertical |
|---|---|
| Taper: | # 60 |
| Top RPM: | 12,000 |
| HP (30 min rating): | 60.00 |
| HP Opt: | 75.00 |
| U Axis: | None |
| Tool Carrier: | ATC |
|---|---|
| Num. Tools: | 30 |
| Tool Change Time (sec): | 9.00 |
| Tool Change Chip Time (sec): | 16.00 |
| Pallet Changer Available: | Optional |
| Num. Pallets: | 2 |
| Num. Axes: | 5 | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| U Axis: | None | ||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
IS THIS YOUR COMPANY?
