Willis Machinery & Tools 5000VS

Willis 5000VS Vertical Knee Milling Machine 5000VS Series 2 Size Machine 5 HP variable speed 60-3600 RPM, 40 taper spindle Hardened & ground table surface Built in tool trays on both ends of table Vertical table raising by 2 HP motor with safety limit switch Chrome plated precision ground quill, full 4-1/8" quill diameter 47" X-axis travel 15" Y-axis travel 59" x12" table 12 longitudinal power feed rates operated by 12-speed gearr box with 2 HP motor Rapid traverse Machine weight 4,950 lbs. Huge 47" x 15" X- Y travels Meehanite castings Extra wide 33-1/2" saddle for maximum support Hardened & ground square ways with Turcite B Automatic lubrication system 2,200 lbs. work piece weight capacity when centered Flood coolant system standard 110-volt control package with thermal overload protection, and low-volt push button pendant Dynamically balanced pulley with special bronze key attached with 2 screws prevents premature breakage. Our standard spring type micrometer adjusting nut provides quick and easy movement for setting spindle depth. Our special power down feed parts are so strong, they can be used over 3,000 RPM spindle speeds. Our 1 piece cluster gear is superior to the much used 3 piece design. No more changing of worn out pulley bushings and keys Extremely low maintenance Accurate RPM readings Direct drive belts - no belt slippage Reduced energy consumption All New Electronic VARIABLE Speed - "EV" SPECIFICATIONS 5000VS Table Dimensions 59" x 11.8" Travels -- Longitudinal/ Cross (Manual) 47" x 15" Vertical Knee Travel 20" T-Slots (3) 5/8" Ram Travel 20" Ram Swivel 360� Quill Diameter 4-1/8" Spindle Motor 5 HP Spindle Speeds (variable) 60-3600 Spindle Taper 40 Taper Quill Power Feed Rates (Inches Per Revolution) 0.00032" 0.0017" 0.0053" Head Tilting Left to Right (Degrees) 90-0-90 Head Tilting Front to Back (Degrees) Fixed Spindle Nose to Table (Min./Max.) 0" - 20" Center of Spindle to Column Face (Min./Max.) 7" - 29" Ground Way Surface Width 3-15/16" Saddle Width 33-1/4" Knee Width 15-1/2" Knee Height 19" Longitudinal Power Feed (12)1"-28" per min. Longitudinal Rapid Traverse 94 IPM Longitudinal Feed Motor 2 HP Table Rising Motor 2 HP Coolant Pump 1/8 HP Net Weight 4,950 lbs. Maximum Work Piece Weight 1650 lbs. (centered) Machine Dimenisions 84"x62"x95"