YCM FV102A-APC
YCM FV102A Vertical Machining Center with High Speed Spindle and APC Unique IDD Spindle Design ▲10,000rpm spindle is designed with precise ceramic ball bearings to display less mass, low centrifugal force, low swell factor, and high rigidity. ▲12,000rpm spindle and 15,000rpm spindle are designed with oil-air lubrication to ensure the optimal accuracy and extend spindle life. Super-Accuracy & Rigidity Construction for High Speed Epoch ▲Hardened ground ballscrews are precisely pre-tensioned at both ends, supported by angular contact thrust bearings, and directly coupled with high responsive AC servomotors of backl ash-free for outstanding accurate positioning repeatability during long machining cycles. ▲All axi utilize the newly developed NR type linear motion guideways from THK of its superior rigidity, low friction, low noise, thus to assure much smoother movement in high-speed traverse. ▲All linear motion guideways are mounted on very fine surface for maximum surface contact with exceptional cutting rigidity and stability.
| Machine Type: | Machining Center |
|---|---|
| Num. of Axes: | 3 |
| Operation Type: | CNC |
| CNC Brand: | MXP-200i |
| CNC Brand Opt: | Fanuc 18i-MB |
| Table Size L x W (in.): | 39.370(L) x 18.890(W) |
|---|---|
| Max Workpiece Weight (lbs): | 882 |
| Support Index Table: | Optional |
| Support Rotary Table: | Optional |
| Direction: | Vertical |
|---|---|
| Taper: | #40 |
| Taper Opt: | |
| Top RPM: | 10,000 |
| Top RPM Opt: | 12,000 |
| HP (30 min rating): | 20.00 |
| Tool Carrier: | ATC |
|---|---|
| Num. Tools: | 24 |
| Tool Change Time (sec): | 3.50 |
| Tool Change Chip Time (sec): | 0.00 |
| Pallet Changer Available: | Standard |
| Num. Pallets: | 2 |
| Num. Axes: | 3 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Num. Axes Opt: | 4 | ||||||||||||||||||
| U Axis: | None | ||||||||||||||||||
|
|||||||||||||||||||
IS THIS YOUR COMPANY?
