HT 645/665 MC Plus

Emco Maier HT 645/665 MC Plus

Emco Maier HT 645/665MC Hyperturn Turning and Milling Center for complex part machining Emco Maier HT 645/665MC Plus QuickMill This B-axis configuration allows the upper turret to swivel to any position within a 45 degrees arc. The combination of axial holder, radial holder and 45 degree holder can reach any angle within a 180 degree range. The advantages are short tool-change times of 0.14 seconds. Emco Maier HT 645/665MC Plus PowerMill In this design a milling spindle with integrated spindle motor replaces the upper turret. The B-axis travels 210 degrees and the tool carrier is a 24-tool or 48-tool magazine with Sandvik CAPTO Tool holders.

Turning and Milling Center with Upper and Lower Turrets or Milling Head and Pick Off Spindle
Machine Style(s): Bar, Chucker
Spindle Direction: Horizontal
Operation Type: CNC
Headstock
Main Spindle Turning Diameter Max: 16.900"
Main Spindle Chuck Diameter: 8.000"
Main Spindle Max Swing: 23.600
Main Spindle Bar Diameter Max: 1.800"
Main Spindle Bar Diameter Opt: 2.600"
Tail Stock Quill And Body: None
Single Spindle
Num. Main Spindles: 1
Main Spindle 1:
RPM: 7,000 HP: 29.50 Index Increment:
RPM Opt: 5,000 HP Opt: 38.90
Main Spindle 2:
RPM: 7,000 HP: 29.50 Index Increment:
RPM Opt: 5,000 HP Opt: 38.90
Sub Spindle (Standard):
RPM: 7,000 HP: 29.50 Index Increment:
Tooling
Primary Tool Carrier: Turret
Max Tools:
Turning: Rotary:
12 12
Rotary Tool:
HP: RPM:
9.00 5,000
Second Tool Carrier: Turret
Max Tools:
Turning: Rotary:
12 12
Rotary Tool:
HP: RPM:
9.00 5,000
Num. Simultaneous Cutting Tools: 2
Secondary Mill/Drill Function:
On-Center Off-Center With 'C' Axis With 'Y' Axis
Standard Standard Standard Standard
Axes And Travels
Number Of Axes: 7
Travel Max Feed Rate Rapid Traverse
X Axis 11.000" 945ipm
Y Axis 3.900" 945ipm
Z Axis 29.500" 945ipm
Manufacturing machine
Manufacturing machine
Okuma LB4000
Hurco
DN Solutions
Chevalier's FMG-B1224/1640
Iscar
Mastercam 2025 Now Available
Iscar