Tsugami/ Rem Sales BW129Z

Dual Spindle, Dual Gang Slides Slash Cycle Time The BW129Z Swiss Type Lathe uses its 3-path control system and dual independent gang slides to slash cycle time and produce complex parts quickly. Multiple driven tools on the main and sub spindle combined with front and rear sliding tool posts enable multiple simultaneous and/or overlapping Swiss turning operations. Cycle time is dramatically reduced by simultaneous rough and finish OD turning (pinch or balanced turning). With our cross rotary tools on the same centerline, pinch milling or drilling is a time reducing function also available.The front and rear tool posts also allow you to have 3 tools in the cut toperform overlapping machining, independent back side machining, simultaneous end-milling and balanced turning. The BW129Z's standard nine cutting axes (X1, Y1, Z1, X2, Y2, Z2, X3, Y3, and Z3) along with its B0 Series Abile Programming Software can make easy work of your toughest applications. Key Advantages Include: T wo Gang Type Tool Posts on Independent Slidesenables independent back side machining, simultaneous end-milling and balanced turning with front/rear posts Simultaneous 3-Path System controlenables overlapping simultaneous machining Dramatic Cycle Time Reduction- 3-system control enables pre-positioning of the next tool 28 Tool Positions Open Tooling Arrangement- rotary tools may be replaced by OD tool, off-center drill or front ID tool for flexibility 210 mm Stroke (Fixed Guide Bushing), 170 mm (Rotary Guide Bushing) Rapid Traverse Rate of 32 m/min- shortened idle and cycle times Fanuc 31i-B CNC Convertiblecan run without sliding headstock with addition of optional chucker kit