Alfing AL 402
Twomotorized spindles – twoparts machined simultaneously. What this means for you: doubleproduction, small footprint and low cost, when compared with four individual machines. And if you need largerproduction quantities, we can build your machining center with morespindles – just the way you need it. Independent Z-axes.Our AL multi-spindle machines have single quills which can travel independently in the Z-axis. This combines the precise adjustability of single-spindle machining centers with the production volume of multi-spindle systems. Variations in tool length can be automatically and individually compensated in the Z-axis. Speed and precision through direct drives.The AL-series combines two features: speed and precision. All moving axes are directly driven by linear motors. The machining unit can be configured with 2 – 4 motorized spindles and an X-axis stroke of 200 to 600 mm. Direct drives provide high-dynamic, precision positioning in the X-, Y-, and Z-axis directions. The very rigid machine bed and drive frames are designed for maximum precision.
| Machine Type: | Machining Center |
|---|---|
| Num. of Axes: | 4 |
| Operation Type: | CNC |
| Table Size L x W (in.): | 31.400(L) x 16.000(W) |
|---|---|
| Max Workpiece Weight (lbs): | 220 |
| Support Index Table: | None |
| Support Rotary Table: | None |
| Direction: | Horizontal |
|---|---|
| Taper: | HSK-A 63 |
| Top RPM: | 16,000 |
| HP (30 min rating): | 44.00 |
| U Axis: | None |
| Tool Carrier: | ATC |
|---|---|
| Num. Tools: | 80 |
| Num. Tools Opt: | 120 |
| Tool Change Chip Time (sec): | 3.20 |
| Pallet Changer Available: | None |
| Num. Axes: | 4 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| U Axis: | None | ||||||||||||||||||
|
|||||||||||||||||||
IS THIS YOUR COMPANY?
