H 63 5-AXIS

ZPS-CNC H 63 5-AXIS

ZPS H63 5-Axis Horizontal Machining Center Original solution of the horizontal machining center with 2-axis NC table. Five axis machining center. Machine design is based on traversable column (Z-axis). Headstock travels within its frame structure (vertical Y-axis). X-axis travel belongs to the saddle with rotary table. A-axis = table tilting in range from -30 degrees up to +105 degrees from horizontal plane. B-axis = table rotation, max. speed 8 rpm. Spindle drive with planetary gearbox gives full power / S6 - 40% : 17 / 25 kW (23/35 hp) at max. speed of : 8,000 rpm, Torque/S6 - 40% : 415 / 611 Nm (306/444 ft-lb) Digital AC feed servo drives, Ball screws driven via timing belts, Ball screws diameter 63 mm( 2.5") Linear roller w ays in all all axes. Table working area diameter 26" Workpiece maximum dimensions diameter 700x800 mm (27.56"x 31.5") Maximum table load 2,200 lb. Machine is equipped with automatic tool changer, chain magazine and 102 tool capacity.

High Performance Horizontal Machining Center with Dual-Axis Rotary Table for full 5-Axis function
Machine Type: Machining Center
Num. of Axes: 5
Operation Type: CNC
CNC Brand: Sinumerik 840D
CNC Brand Opt: Heidenhain iTNC530
Table/Work Support
Table Size L x W (in.): 25.980(L) x 25.980(W)
Max Workpiece Weight (lbs): 2,200
Spindle(s)
Direction: Horizontal
Taper: ISO 50
Taper Opt:
Top RPM: 8,000
Top RPM Opt: 12,000
HP (30 min rating): 30.00
Tooling
Tool Carrier: ATC
Num. Tools: 102
Tool Change Chip Time (sec): 10.00
Axes And Travels
Num. Axes: 5
U Axis: None
Travel Max Feed Rate Rapid Traverse
X1 31.500" 590 1,572ipm
Y1 31.500" 590 1,572ipm
Z1 39.760" 590 1,572ipm
A1 135.000°
B1 360.000°
Manufacturing machine
Manufacturing machine
Iscar
Okuma LB4000
Hurco
Mastercam 2025 Now Available
Chevalier's FMG-B1224/1640
DN Solutions
Okuma LB4000