[ No Image Available ]

Bardons & Oliver Inc. 2SC-500/650

notes_tur1231 2SC Big Bore Lathes Advanced Polymer Composition Spindle Housing for maximum thermal stability and vibration damping , Automatic Magazine and Bar Loader feeds stock up to 6.50" diameter x 72" long. Flexible 12 Interference-Free Tool Stations Large Spindle Bore - 5.0", 6.5", and 8.0" capacities Large Turning Capacity - 15" and 18" Chuck Size Adjustable Spindle Housing Alignment - Ensures Facing Cuts within 0.0002" over a 12" diameter CNC Control - GE-Fanuc 18i-TA Efficient High Spindle Speed - 2000 or 3000 RPM Maximum High Efficiency Spindle Drive - Goodyear Flexten 24-Rib Poly-Vee Belt for Maximum Power Transmission with Minimal Stretch and Vibration, and Low Noise Level Siemens Model 611A AC Spindle Drive and Motor - 50 HP Continuous Rating Dependable Advanced Spindle Bearing Design - 25 Degree Angular Contact Ball Bearings Dual Front and Dual Rear Maintenance - Free Bearing Lubrication System - Kluberlube Isoflex NBU - 15 Permanently Grease-Packed Protective Front Closure System- Six Point Coolant & Dust Checks: -0.003" Radial Clearance -Overlapping Chip Shield -Positive Air Pressure on Front Closure Maximum Thermal Stability and Vibration Damping - Symmetrical Spindle Housing design: -ITW Philadelphia Resins -Polymer Composition -FEA-Based Design Parameters -Rugged, Accurate spindle Filler Tube System Models include 2SC-500, 2SC-650, 2SC-800.

50 / 80 HP Big Bore CNC Turning Center with sub spindle
Machine Style(s): Bar, Chucker
Spindle Direction: Horizontal
Operation Type: CNC
Headstock
Main Spindle Turning Diameter Max: 15.000"
Main Spindle Turning Length Max: 20.500"
Main Spindle Chuck Diameter: 15.000"
Main Spindle Chuck Diameter Opt: 18.000"
Main Spindle Bar Diameter Max: 5.000"
Main Spindle Bar Diameter Opt: 6.500"
Sub Spindle Turning Diameter Max: 15.000"
Tail Stock Quill And Body: Optional
Single Spindle
Num. Main Spindles: 1
Main Spindle 1:
RPM: 3,000 HP: 54.00 Index Increment:
RPM Opt: 2,000 HP Opt: 80.00
Main Spindle 2:
RPM: 3,000 HP: 54.00 Index Increment:
RPM Opt: 2,000 HP Opt: 80.00
Sub Spindle (Optional):
RPM: 3,000 HP: 54.00 Index Increment:
Tooling
Primary Tool Carrier: TURRET
Max Tools:
Turning: Rotary:
15 6
Rotary Tool:
HP: RPM:
10.00 2,000
Num. Simultaneous Cutting Tools: 1
Num. Simultaneous Cutting Tools Opt: 2
Secondary Mill/Drill Function:
On-Center Off-Center With 'C' Axis With 'Y' Axis
Optional None Optional None
Axes And Travels
Number Of Axes: 2
Number Of Axes Opt: 3
Number Of Axes Opt 2: 3
Travel Max Feed Rate Rapid Traverse
X Axis 7.750" 400ipm
Y Axis 400ipm
Z Axis 12.000" 400ipm
Manufacturing machine
Manufacturing machine
Okuma
DN Solutions
Mastercam 2025 Now Available
Hurco
Iscar
Chevalier's FMG-B1224/1640
Okuma