Sharp-CNC STF Series
This is a high precision CNC flat bed lathe with FANUC Oi-TD control. The STFseries is available with option of 9", 12" or15" spindle bore, 37.38"- 59.84" swing over bed,bed width of 31.88"and the spindle motor is available up to 29HP. The hardend and ground bedways are made from high quality Meehanite castings. The spindle drive has 4 steps to deliver full power at all speeds. Bedways and ballscrews are centrally lubricated with low level alarm. Headstock is equipped with heat exchanger to disperse heat and maintain spindle accuracy. Full length chip conveyer and enclosed splash guard are all standard accessories.
| Machine Style(s): | Bar, Chucker |
|---|---|
| Spindle Direction: | Horizontal |
| Operation Type: | CNC |
| CNC Type: | Fanuc 0i-TC |
| Main Spindle Turning Diameter Max: | 43.000" |
|---|---|
| Main Spindle Turning Length Max: | 40.000" |
| Main Spindle Chuck Diameter: | 32.000" |
| Main Spindle Chuck Diameter Opt: | 50.000" |
| Main Spindle Max Swing: | 59.840 |
| Main Spindle Bar Diameter Max: | 6.000" |
| Main Spindle Bar Diameter Opt: | 15.000" |
| Tail Stock Quill And Body: | None |
| Num. Main Spindles: | 1 | |||||
|---|---|---|---|---|---|---|
| Main Spindle 1: |
|
|||||
| Main Spindle 2: |
|
| Primary Tool Carrier: | Opt. Turret | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Max Tools: |
|
||||||||
| Num. Simultaneous Cutting Tools: | 1 | ||||||||
| Secondary Mill/Drill Function: |
|
| Number Of Axes: | 2 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|||||||||||||||||||
IS THIS YOUR COMPANY?
