Chmer RX853SL
TheRX853SL isa large travel wire EDM using CHMER-built linear motors, Panasonic drives andclosed loopprecision glass scale feedback. The Z-axis can be increased to either 400mm (15.7") or up to 500mm (19.6") as required to accomodate larger workpieces. The unique CHMER automatic wire threader (AWT) is especially suited for these large travel wire machines in that in the event of a wire break in the middle of a large cut the CHMER AWT does not need to go back to the start point, rethread, dry run back to the start, then resume the cut which is typical of most AWTs on the market, thus saving time and money. The T-frame design of the RX series also allows for extra weight capacity versus compound table design as well as space savings - smaller footprint.
| Machine Type: | CNC Wire |
|---|---|
| CNC Standard Model: | Chmer W5F |
| Frame Type: | Other |
| Submersible: | Standard |
| Max Part Size (L x D x H): | 47.630" x 31.400" x 11.600" 1209.800mm x 797.560mm x 294.640mm |
|---|
| Max Taper Angle: | 21.0000° |
|---|---|
| Min Hole Diameter: | 0.0100" |
| Max Wire Diameter: | 0.0100" |
| Auto Rethreading: | Standard |
| Auto Restart After Power Out: | Standard |
| Auto Slug Removal: | Optional |
| Anti-electolysis power supply: | Standard |
| Auto Second Cut: | Standard |
| Start Hole Device: | Standard |
| Number Of Axes: | 5 |
|---|---|
| X Axis Travel: | 31.400" |
| Y Axis Travel: | 19.600" |
| Z Axis Travel: | 11.810" |
| Z Axis Travel Opt: | 19.600" |
| U Axis Available: | Standard |
IS THIS YOUR COMPANY?
