Donau DONAUFLEX 135
Up to 3 fixed working stations are delivering a maximun of flexibility for machining of large and small workpieces as well as very long workpieces. Swivel tables are useful for drilling and tapping workpieces at angular positions. Long travels and workpiece heights up to 1500mm are guaranteed. Easy-sliding simultaneous movement in 3 axes, straight to the drilling or tapping position. The self-centering drill head is positioning itself exactly into the center holes. Concentric facing is made possible with a self-centering taper into the drill hole. The self-centering position accuracy is allowing core hole drilling, facing and tapping in series work and is therefore avoiding frequent tool changes. The DONAUFLEX-Range is designed to modern ergonomics for a non-fatigue machine operation. The workin table heigt of 905 mm and the always optimal position to the spindle head, make it easy for the operator to stand upright and to have a best possible view on the machining process. Low Axis fri ction force of approx. 35 N are easing substantially the sliding movements in radial and angular directions, in order to move the tool fast and precise in any working position
| Num. of Axes: | 4 |
|---|
| Table Size L x W (in.): | 47.200(L) x 29.500(W) |
|---|---|
| Table Size L x W (in.) Opt: | 70.860(L) x 23.600(W) |
| Max Workpiece Weight (lbs): | 2,000 |
| Support Index Table: | Optional |
| Support Rotary Table: | None |
| Direction: | Vertical |
|---|---|
| Taper: | 4 MT |
| Top RPM: | 3,200 |
| HP (30 min rating): | 5.30 |
| U Axis: | Optional |
| Tool Carrier: | Manual |
|---|---|
| Num. Tools: | 1 |
| Num. Tools Opt: | 1 |
| Tool Change Chip Time (sec): | 0.00 |
| Pallet Changer Available: | Optional |
| Num. Pallets: | 1 |
| Num. Pallets Opt: | 3 |
| Num. Axes: | 4 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| U Axis: | Optional | ||||||||||||||||||
|
|||||||||||||||||||
IS THIS YOUR COMPANY?
