Donau DONAUMERIC 440
Ideal forworking at up to 3 working stations, delivering highest flexibility by machining of different workpieces. Single parts, series works, large and small parts, irregular shapes and long parts – with the DONAUMERIC 440 and the DONAUPORT 540 solvemultiple machining tasks. At two different working stations, swivel tables enable angled drilling and tapping operations. Large travel paths of up to approx. 15 meters at the X-Axis and workpiece heights of up to 1,5 meters at the Z-Axis are distiguishing these machines Automatic, synchronic 3-axes approach for moving quickly into all machining positions Time-wasting marking and drawing are obsolete. An automatic tool change system enables multi-machine operation. When integrating a 3-D touch probe, eliminatetime-consuming alignments and reducesetup times. Simple workshop-oriented dialogue programming without previous CNC experience. Import of CAD data through a USB interface. There is the choice to operate in automatic CNC mode or complet ely manual DONAUMERIC 440 - and DONAUPORT 540 - CNC-Rapid Radial drilling machines are designed to the demand for modern ergonomics and thus provide non-fatigue operation
| Num. of Axes: | 4 |
|---|---|
| Operation Type: | CNC |
| Table Size L x W (in.): | 70.860(L) x 23.600(W) |
|---|---|
| Max Workpiece Weight (lbs): | 2,000 |
| Support Index Table: | Optional |
| Support Rotary Table: | None |
| Direction: | Vertical |
|---|---|
| Taper: | SA 40 |
| Top RPM: | 2,800 |
| HP (30 min rating): | 7.30 |
| U Axis: | None |
| Tool Carrier: | Manual (ATC Opt) |
|---|---|
| Num. Tools: | 1 |
| Num. Tools Opt: | 10 |
| Tool Change Chip Time (sec): | 0.00 |
| Pallet Changer Available: | Optional |
| Num. Pallets: | 3 |
| Num. Axes: | 4 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| U Axis: | None | ||||||||||||||||||
|
|||||||||||||||||||
IS THIS YOUR COMPANY?
