FFG MAG SPECHT 600

The Cross Huller SPECHT® Series Machining Centers and Boring Machines feature 3, 4, 5, and 6-axis types with travelling "W" axis table (instead of W axis on the spindle). The series is especially productive in many automotive and other precision, and complex applications. (Model Shown SPECHT 600). Higher productivity / reduction of cycle time by direct loading (omission of travelling distance of the W-axis) and by assembling the rotary table (designed as A-axis or B-axis) in two positions (with shorter tools the rotary table is closer to the spindle) Higher accuracy on all machining sequences which do not need the jig boring accuracy of a W-axis machine. This is achieved by the firmly assembled fixture. Compact, space-saving design by omission of W-axis. Due to a lowered operating height of the tool magazine interfering operating platforms can be left out. Newly designed disc magazine for up to 29 tools with a maximum length of 3 20 mm. It is not necessary to set up the machine bed with a 5-point support in order to guarantee the geometric features. The static weight is supported by 3 fixation points in the basic position. Optional A or B axis allow simplified part flow since the parts can always remain in the same position. Clean working area due to the air flow that is directed from top to bottom (instead of air flow from bottom to top) Reduced coolant demand due to optional chip conveyor spiral. Can be used for many machining tasks in dry machining.