+GF+ MIKRON UCP 800
notes_mil3332 Mikron UCP 800 DURO Mikron UCP 800 DURO Ultimate precision in 5-axis machining The UCP 800 Duro (universal machining centre) allows high-precision 5-axes simultaneous machining e.g. in tool and mould making, in electrode production or also in the production of accurate parts. Its travel paths are identical with those of the VCP 800W Duro. Broadly supported guides on all axes ensure the necessary stability and rigidity during the rapid movements. Operating benefits Lower Lead Times - High speed and feeds Higher Quality - Linear scales - Machine stability Low Finished Part Cost - Higher tool life - Minimal hand finishing - Minimizes requirem ent for EDM New Business Opportunities - Thin wall machining - Hardened steel machining - etc.
| Machine Type: | Machining Center |
|---|---|
| Num. of Axes: | 4 |
| Operation Type: | CNC |
| CNC Brand: | Heidenhain iTNC 426 |
| CNC Brand Opt: | Heidenhain iTNC 530 |
| Table Size L x W (in.): | 23.620(L) x 23.620(W) |
|---|---|
| Max Workpiece Weight (lbs): | 3,520 |
| Direction: | Vertical |
|---|---|
| Taper: | HSK 40 |
| Taper Opt: | HSK 63 |
| Top RPM: | 12,000 |
| Top RPM Opt: | 20,000 |
| HP (30 min rating): | 20.00 |
| HP Opt: | 21.00 |
| Tool Carrier: | ATC |
|---|---|
| Num. Tools: | 30 |
| Num. Tools Opt: | 36 |
| Tool Change Time (sec): | 2.00 |
| Tool Change Chip Time (sec): | 8.00 |
| Num. Axes: | 4 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Num. Axes Opt: | 5 | ||||||||||||||||||
| U Axis: | None | ||||||||||||||||||
|
|||||||||||||||||||
IS THIS YOUR COMPANY?
