H. H. Roberts TW-24L
HH Roberts Machinery TWL Machining Center The TW-18L shown with optional spindle temperature control system at the right rear of the machine, for the 12,000 rpm spindle fitted on this one. The high speed spindles enable improved surface finish when using the high speed machining capabilities of the Anilam 6000 series CNC control. Feed rates of 400 IPM or more are available in contouring with efficient programming. A 128 block look ahead and responsive European AC digital drives adapt to the contouring for blend contours smoothly. This control is a hybrid of a Heidenhain CNC processor and servo drive system, combined with servo motors made in Europe at factories in the Heidenhain group of companies, AND the popular Anilam user interface for intuitive, flexible operation.
| Machine Type: | Machining Center |
|---|---|
| Num. of Axes: | 3 |
| Operation Type: | CNC |
| CNC Brand: | Anilam |
| CNC Brand Opt: | Fanuc |
| Table Size L x W (in.): | 34.000(L) x 18.000(W) |
|---|---|
| Max Workpiece Weight (lbs): | 660 |
| Support Index Table: | Optional |
| Support Rotary Table: | Optional |
| Direction: | Vertical |
|---|---|
| Taper: | #40 |
| Taper Opt: | |
| Top RPM: | 8,000 |
| Top RPM Opt: | 12,000 |
| HP (30 min rating): | 7.50 |
| Tool Carrier: | ATC, Carousel or Arm |
|---|---|
| Num. Tools: | 16 |
| Num. Tools Opt: | 24 |
| Tool Change Time (sec): | 6.00 |
| Tool Change Chip Time (sec): | 8.00 |
| Pallet Changer Available: | Optional |
| Num. Pallets: | 2 |
| Num. Axes: | 3 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Num. Axes Opt: | 4 | ||||||||||||||||||
| U Axis: | None | ||||||||||||||||||
|
|||||||||||||||||||
IS THIS YOUR COMPANY?
